We offer various solutions for the control and regulation of our units, which can be used depending on the application and requirements:

Electromechanical control

This variant is ideal for simple applications. All integrated actuators are factory-wired to terminals and can be connected to our electromechanical accessories such as thermostats or external controllers.

KaControl MC1

Our comprehensive comfort control offers extended control options for individual rooms or appliance groups.

It can be operated either via a touch display or a web interface.

Thanks to on-site 0-10V control or common communication protocols such as Modbus RTU & TCP, BACnet and KNX, this solution is ideal for all BMS applications.

Trench convectors can be selected in different lengths (A) depending on the version, so that they can be optimally integrated into common window hinge systems.

The functional width (B) and height (C) allow individual adaptation to the floor structure and at the same time determine the performance of the trench convectors.

Continuous hinges can be realized using empty parts, column recesses, angles, etc.

Various grating variants are available for the cover, which ideally meet both functional and design requirements. Different materials can be selected depending on the application area.

In addition, different surface coatings and colors are possible in order to achieve a visual adaptation to the building architecture and interior design.

It is technically relevant that the choice of material and geometry can influence the free air cross-section and thus have an impact on the performance of the unit. These effects are taken into account in the performance calculation.

• The heat outputs were determined in accordance with DIN EN 16430 (Part 1-2) under realistic conditions on the basis of DIN EN 442.
• The standard regulates the performance measurements in uniform standards, especially for trench convectors.
• Ensuring uniform comparability of different units.
• Safety in planning and design.

• directly on the façade, without any significant gap
• provide expansion joints on site to prevent compression by, for example, screed
• Arrangement convector on the window side, tangential fan on the room side
• effective heating and shielding on glass surfaces to avoid condensation
• Rising air forms an air vortex that flows into the room without creating a draft.

The units are equipped with quiet, sound-optimized EC fans.

Sound pressure and sound power levels are tabulated in the technical data.

The actual sound pressure level depends heavily on:

• the number of units;
• the acoustic properties of the room.

Recommendation: The design should always take into account the permissible sound pressure level in the room.

The Katherm QK nano offers two options for integration into the heating system – depending on the desired control type:

Decentralised valve control:

When controlled directly in the underfloor convector:

Use of a valve kit with valve body, 24V actuator and lockable return fitting.

Central control via heating circuit distributor:

With centralized regulation:

Use of a connection set with two return fittings to shut off the convector.

• Considers the environmental impact of the product over its entire life cycle.
• Published as an Environmental Product Declaration (EPD) in accordance with standard EN 15804.
• Available for download at International EPD System.
• Item number-specific life cycle assessment data in the technical data sheets.
• Product is registered in the DGNB Navigator (building product platform).

Serves as proof for certification systems, e.g:

• DGNB (German Sustainable Building Council);
• BREEAM (Building Research Establishment Environmental Assessment Method);
• LEED (Leadership in Energy and Environmental Design).