The KaCool D HC Fan Coil was specially developed for use in cleanrooms, e.g. in hospitals and doctors' offices. It meets particularly high requirements for hygiene and cleanliness.
The KaCool D HC is designed for use in sensitive healthcare areas and impresses with its sophisticated, hygiene-compliant design. Its construction, components, and easy cleaning and maintenance support a consistently very high level of cleanliness and operational safety.
The unit is available in an optimally coordinated standard size.
The ceiling cassettes are ideally suited for all rooms with suspended ceilings. The dimensions selected according to the grid dimension facilitate installation and ensure a flush appearance.
The unit is suitable for dry and wet cooling. The condensate tray is fully coated on the outside surface. A factory-installed and prewired condensate pump is included in the standard scope of delivery.
With primary air supply
Optionally, fresh air can be introduced via up to two DN 100 supply air spigots.
The KaCool D HC is very easy to maintain. The filters can be changed easily, quickly and safely via magnetic rails. An integrated differential pressure sensor for filter monitoring indicates the need for replacement at an early stage.
The electrical connection located outside the unit is easily accessible via an inspection opening or the suspended ceiling.
A prefilter is installed in the intake area of the KaCool D HC, and a hygiene filter in the discharge area.
You can find more information about the filter properties here.
The KaCool D HC is developed and manufactured in Germany to the highest standards.
With the integrated KaControl MC control, the KaCool D HC offers bidirectional communication for up to 10 units within one group/room via CAN bus. With KaControl MC, the unit can be easily integrated into common building management systems such as Modbus RTU, Modbus TCP, BACnet/IP and KNX-TP.
This variant is ideal for simple applications. All integrated actuators are factory-wired to a terminal and can be connected to our electromechanical accessories such as thermostats or external controllers.
Adapt the product to your requirements – these options are available for selection.
ISO ePM1>85% filter (formerly F9) or HEPA filter class 13
Connection side left or right
With our free calculation program, you can find the product with the right performance data for your project in just a few steps. You can then download the official technical data sheet with your individual project values as a PDF.
Magdeburg
Old Town Quarter
Magdeburg
Old Town Quarter
Magdeburg