Aachen
Pulsar Photonics GmbH
Aachen
Pulsar Photonics GmbH
- New headquarters building
- 18 x Venkon
- 1 x Katherm HK
- 7 x KaDeck
- 4 x Ultra
- 2 x KaClima
- KaControl
#Fan Coils
#trench technology
#Unit Heaters
#Heat pumps and chillers
#Control technology
Heat pumps and chillers
The future-proof climate control solution KaClima, as a central hydronic system, supplies decentralized room units with hot or chilled water to heat or cool rooms. Depending on the unit size, the units cover a capacity range of 5 - 676 kW.
Hydronic systems for heating and cooling buildings provide future-proof reliability. In the combination of chiller and heat pump with a suitable room unit, only minimum quantities of refrigerant are used. This is exactly what "Future-proof heating and cooling" means.
Reversible use: heating and cooling
The heat pump systems feature reversible operation, allowing the system to be used for both heating and cooling the building. The cooling function is already integrated into the unit and does not require any additional air conditioning (technology). This allows the system to provide demand-based temperature control all year round, depending on the respective unit size.
Modular capacity expansion through cascading
The KaClima units are designed so that multiple units can be connected in a cascade and operate together as one system. This allows the capacity to be flexibly adapted to actual demand – from smaller applications through to high capacity requirements. At the same time, this concept ensures a high level of operational reliability and offers maximum flexibility in planning.
Future-oriented refrigerant R290
Our KaClima S and KaClima M units use the natural refrigerant R290 (propane) for an environmentally friendly heating and cooling solution. Additional unit series will also be gradually equipped with R290.
With an extremely low global warming potential (GWP) of just 0.02, R290 is a sustainable choice. As a non-F-gas, it is not affected by the phase-down or future restrictions and bans. The low refrigerant charge volumes further minimize the ecological footprint.
Our products
KaClima S
- Heating
- Cooling
KaClima M
- Heating
- Cooling
KaClima L
- Heating
- Cooling
KaClima XL
- Heating
- Cooling
KaClima XXL
- Heating
- Cooling
Economical in operation
The KaClima S, M and L heat pumps meet the requirements of EU Directive 811/2013 and fall into the A++ to A+++ energy efficiency classes, which ensures extremely economical operation. This reduces the electricity bill and protects the environment.
Noise-reduced operation
A gradually adjustable mode for noise reduction – the so-called Low-Noise mode – effectively reduces disturbing noise. In night operation, the system automatically throttles back, resulting in a significant reduction in noise, depending on the respective unit size.
Technical features
Reliable control
- Achieve reliable and consistent performance of your loads with our constant supply temperature control.
- This ensures that your units always operate optimally and guarantee smooth operation.
Prepared for quick installation
- The KaClima units are delivered to the construction site optimally prepared – all main components are already integrated and factory-tested.
- On site, only the field-provided connections such as pipework, shut-off valves and the electrical connection need to be added.
- The unit is designed for outdoor installation and can be installed immediately.
Flexible equipment and accessories
- Equipped as standard with central components for safe and efficient operation
- Including an intuitive control unit as well as safety valve, master switch and flow monitor
- Depending on the version, optional factory-integrated components (e.g. circulation pump)
- Extensive accessories for on-site installation, e.g. dirt separator or vibration damper
- Installation, operation and use can be individually adapted to project-specific requirements
The heat pump system
The basic concept is proven: A central heat generator supplies room units with temperature-controlled water, which deliver heat to the room as needed. What used to be an oil or gas boiler is now handled by the heat pump. Instead of conventional radiators, fan-assisted Perimeter Heating is increasingly being used.
These units show their strengths particularly at low system temperatures: thanks to active air circulation, they quickly achieve 3-4 times the capacity compared with conventional radiators – especially in the range typically (operated) at low temperature for heat pumps.
However, the decisive added value lies in year-round use. Thanks to the reversible operation of modern heat pumps including a chiller, the system can also be used efficiently for room cooling in summer. In combination with fan-assisted Perimeter Heating, a traditional heating solution thus becomes a holistic system for heating and cooling.
Are you interested in pure chillers? Feel free to contact us – we will advise you individually and competently.
Project solutions
Aachen
Pulsar Photonics GmbH
Spenge
Postal distribution center
Spenge
Postal distribution center
Spenge
Postal distribution center
- New distribution center
- 3 x TOP (with KaMax air outlet)
- 1 x KaClima S
- Buffer storage tank with electric heating
- 1 x SEL control panel
#Unit Heaters
#Control technology
#Heat pumps and chillers
Krefeld
ABECO Industrie-Computer GmbH
Krefeld
ABECO Industrie-Computer GmbH
Krefeld
ABECO Industrie-Computer GmbH
- New construction of production and storage rooms as well as offices
- 2 x KaClima S
#Heat pumps and chillers
Salzbergen
Family Center
Salzbergen
Family Center
Salzbergen
Family Center
- From event hall to meeting center
- AHU unit (supply air/extract air, 6500 m³/h)
- DAL359
- KaControl control system
#AHU units
#Diffusers
#Control technology
Lingen (Ems)
Autohaus Jansen
Lingen (Ems)
Autohaus Jansen
Lingen (Ems)
Autohaus Jansen
- Complete refurbishment of the building and building services
- 18 x KaCool D AF
- 1 x KaCool W
- 6 x TOP
- 8 x Ultra
- 2 x KaClima M
#Unit Heaters
#Heat pumps and chillers
#Fan Coils
Elmshorn
Hospital LogiServe GmbH
Elmshorn
Hospital LogiServe GmbH
Elmshorn
Hospital LogiServe GmbH
- Construction of a new site
- 23 x TOP-C
- 4 x KaClima M
- 1 x SEL-Tableau
#Unit Heaters
#Control technology
#Heat pumps and chillers
Tönisvorst
NOFFZ Technologies GmbH
Tönisvorst
NOFFZ Technologies GmbH
Tönisvorst
NOFFZ Technologies GmbH
- New construction of development, administrative, and production facilities
- 2 x KaClima L
#Heat pumps and chillers
We're happy to help
Find your contact person in our extensive sales network.
info@kampmanngroup.com+49 591 7108-8020