Katherm NK
Natural convection.
- Heating
Trench convectors can be selected in different lengths (A) depending on the version, so that they can be optimally integrated into common window hinge systems.
The functional width (B) and height (C) allow individual adaptation to the floor structure and at the same time determine the performance of the trench convectors.
Continuous hinges can be realized using empty parts, column recesses, angles, etc.
| Width (B) | Height (C) | Length (A) |
|---|---|---|
| 137 mm | 92 mm | 800 - 5000 mm |
| 137 mm | 120 mm | 800 - 5000 mm |
| 182 mm | 92 mm | 800 - 5000 mm |
| 182 mm | 120 mm | 800 - 5000 mm |
| 182 mm | 150 mm | 800 - 5000 mm |
| 182 mm | 200 mm | 800 - 5000 mm |
| 232 mm | 92 mm | 800 - 5000 mm |
| 232 mm | 120 mm | 800 - 5000 mm |
| 232 mm | 150 mm | 800 - 5000 mm |
| 232 mm | 200 mm | 800 - 5000 mm |
| 300 mm | 92 mm | 800 - 5000 mm |
| 300 mm | 120 mm | 800 - 5000 mm |
| 300 mm | 150 mm | 800 - 5000 mm |
| 300 mm | 200 mm | 800 - 5000 mm |
| 380 mm | 92 mm | 800 - 5000 mm |
| 380 mm | 120 mm | 800 - 5000 mm |
| 380 mm | 150 mm | 800 - 5000 mm |
| 380 mm | 200 mm | 800 - 5000 mm |
Various grating variants are available for the cover, which ideally meet both functional and design requirements. Different materials can be selected depending on the application area.
In addition, different surface coatings and colors are possible in order to achieve a visual adaptation to the building architecture and interior design.
It is technically relevant that the choice of material and geometry can influence the free air cross-section and thus have an impact on the performance of the unit. These effects are taken into account in the performance calculation.
| Grille design | Grille finish | Grille bar spacing | Free area, approx. |
|---|---|---|---|
| Roll-up grille | Aluminium, natural anodised | 9.0 mm | 65 % |
| Roll-up grille | Aluminium, brass anodised | 9.0 mm | 65 % |
| Roll-up grille | Aluminium, bronze anodised | 9.0 mm | 65 % |
| Roll-up grille | Aluminium, black anodised | 9.0 mm | 65 % |
| Roll-up grille | Aluminium, light bronze | 9.0 mm | 65 % |
| Roll-up grille | Aluminium, painted DB 703 | 9.0 mm | 65 % |
| Roll-up grille | Stainless steel | 10.5 mm | 65 % |
| Roll-up grille | Stainless steel, polished | 10.5 mm | 65 % |
| Roll-up grille | Brass, natural | 9.0 mm | 65 % |
| Linear grille | Aluminium, natural anodised | 9.0 mm | 65 % |
| Linear grille | Aluminium, brass anodised | 9.0 mm | 65 % |
| Linear grille | Aluminium, bronze anodised | 9.0 mm | 65 % |
| Linear grille | Aluminium, black anodised | 9.0 mm | 65 % |
| Linear grille | Aluminium, light bronze | 9.0 mm | 65 % |
| Linear grille | Aluminium, painted DB 703 | 9.0 mm | 65 % |
| Linear grille | Stainless steel | 10.5 mm | 65 % |
| Linear grille | Stainless steel, polished | 10.5 mm | 65 % |
| Linear grille | Brass, natural | 9.0 mm | 65 % |
Additional, attachable ZL supply air ducts are available for the Katherm NK, allowing additional treated supply air to be introduced into rooms.
Features:
The slider can be moved into different positions to set the required volumetric flow for the room on the supply air module.
Serves as proof for certification systems, e.g:
Results per page
Results per page
Page 1 of 0
Results per page
Results per page
Page 1 of 0