Freestanding convectors can be selected in various lengths (A) so that they can be optimally integrated into common window hinge systems.
The functional installation depth (B) and height (C) allow individual adaptation to the installation location and at the same time determine the performance of the convectors.
| Height (C) | Depth (B) | Length (A) |
|---|---|---|
| 160 mm | 160 mm | 950 mm |
| 160 mm | 160 mm | 1150 mm |
| 160 mm | 160 mm | 1400 mm |
| 160 mm | 160 mm | 1800 mm |
| 160 mm | 160 mm | 2150 mm |
Various grating variants are available for the cover, which ideally meet both functional and design requirements. Different materials can be selected depending on the application area.
In addition, different surface coatings and colors are possible in order to achieve a visual adaptation to the building architecture and interior design.
It is technically relevant that the choice of material and geometry can influence the free air cross-section and thus have an impact on the performance of the unit. These effects are taken into account in the performance calculation.
| Grille design | Grille finish | Grille bar spacing | Free area, approx. |
|---|---|---|---|
| Orthogonal grille | Steel, coated RAL 9006 | 4.8 mm | 70 % |
| Orthogonal grille | Steel, coated DB 703 | 4.8 mm | 70 % |
| Orthogonal grille | Steel, coated RAL 9005 | 4.8 mm | 70 % |
| Orthogonal grille | Steel, coated RAL 9007 | 4.8 mm | 70 % |
| Orthogonal grille | Stainless steel | 4.8 mm | 70 % |
| Linear grille | Steel, coated RAL 9006 | 4.8 mm | 70 % |
| Linear grille | Steel, coated DB 703 | 4.8 mm | 70 % |
| Linear grille | Steel, coated RAL 9005 | 4.8 mm | 70 % |
| Linear grille | Steel, coated RAL 9007 | 4.8 mm | 70 % |
| Linear grille | Stainless steel | 4.8 mm | 70 % |
We offer various solutions for the control and regulation of our units, which can be used depending on the application and requirements:
Electromechanical control
This variant is ideal for simple applications. All integrated actuators are factory-wired to terminals and can be connected to our electromechanical accessories such as thermostats or external controllers.
| Control option |
|---|
| electromechanical 24 V |
| electromechanical 230 V |
The units are equipped with quiet, sound-optimized EC fans.
Sound pressure and sound power levels are tabulated in the technical data.
The actual sound pressure level depends heavily on:
Recommendation: The design should always take into account the permissible sound pressure level in the room.
Results per page
Results per page
Page 1 of 0
Results per page
Results per page
Page 1 of 0