The units are available in several model sizes to allow the performance to be tailored to requirements. The model size is selected depending on the required thermal output, the air volume flow and the sound requirements of the room. Larger model sizes offer higher performance, but are associated with larger housing dimensions, which must be taken into account when planning the installation situation.

The installation location determines the basic structure of the unit.

The ceiling version has been specially developed for horizontal installation on the ceiling, with the air outlet facing forwards. The wall-mounted model, on the other hand, is designed for vertical installation on walls, with the air outlet facing upwards.

The two variants are not compatible with each other due to the design differences - particularly in the condensate tray and condensate drainage. Each version is specifically designed for fixing, condensate drainage and maintenance accessibility.

The selection of the right variant should therefore always be based on the structural conditions and maintenance requirements.

2-pipe system

With this design, the entire heat exchanger surface is available for temperature control, depending on the medium currently present in the pipe system (cold or hot water). Switch-over between heating and cooling takes place centrally via the building management system. This variant is particularly suitable for applications with seasonal switch-over and reduced installation effort.

4-pipe system

This version is suitable for sophisticated air conditioning concepts in which each room zone or unit can be switched over individually between heating and cooling. By routing the heating and cooling medium separately, the system offers maximum flexibility and comfort - ideal for buildings with changing usage requirements.

Depending on the structural conditions and installation requirements, two connection variants can be selected:

Left or right connection.

These variants enable optimum adaptation to the pipe routing on site and reduce both installation work and costs.

For wall-mounted units, the connection side is defined from the viewing angle of the mounted unit.

For ceiling-mounted units, please refer to the technical drawing or installation instructions for the definition.

Different filter types are available depending on the application area and the air quality requirements.

The standard version with an ISO Coarse filter primarily serves to protect the device by retaining coarse particles such as dust and fibers.

For applications with increased demands on indoor air quality, more powerful filters in accordance with ISO ePM, MERV or HEPA can be integrated as an option. These improve the indoor air by removing fine particles and aerosols from the intake air.

The suitable filter should be selected taking into account the project-specific requirements and the planned maintenance intervals.

We offer various solutions for the control and regulation of our units, which can be used depending on the application and requirements:

Electromechanical control

This variant is ideal for simple applications. All integrated actuators are factory-wired to terminals and can be connected to our electromechanical accessories such as thermostats or external controllers.

KaControl MC1

Our comprehensive comfort control offers extended control options for individual rooms or appliance groups. It can be operated either via a touch display or a web interface. Thanks to on-site 0-10 V control or common communication protocols such as Modbus RTU & TCP, BACnet and KNX, this solution is ideal for all BMS applications.

• The air outlet area needs to be completely barrier-free.
• A distance of 100 mm from the air intake area must be maintained.
• With cladding, at least 50 mm must be freely accessible in the direction of the air outlet area.
• A distance of 100 mm must be maintained from the underside of the device.
• A distance of 215 mm must be maintained from the sides.
• At the rear, a minimum clearance of 100 mm is required for ceiling mounting.

• Wall-mounted - water connection side on the left (Fig. 1)
• Wall-mounted - water connection side right (Fig. 2)
• Ceiling mounting - water connection side left (Fig. 3)
• Ceiling mounting - water connection side right (Fig. 4)

• No obstruction in air distribution and air intake
• Full-surface revision option
• Minimum distance to occupied zone with casing 1.5 m
• Secure fastening options must be available

Avoid the following:

• Impairment of free air circulation due to e.g. lamps, furniture or shelves
• Obstruction of air intake and air distribution
• Electronic units below the unit
• Inaccessibility for maintenance work

• Variable number of spigots depending on structural conditions and air requirements
• Round tube diameter selectable: 100 - 200 mm
• Number of spigots as a function of volumetric flow and spigot speed
• The connected duct network must not cause pressure losses >180 Pa.

• Complies with the relevant hygiene guideline VDI 6022
• Goal: Ensuring hygienic supply air that is harmless to health
• Applies to common rooms such as workplaces, meeting rooms, break rooms, living rooms, sports facilities and sales rooms.
• With factory-fitted ISO Coarse filter in the intake area.
• Accessibility of all ventilated and water-bearing components for cleaning.

• Considers the environmental impact of the product over its entire life cycle.
• Published as an Environmental Product Declaration (EPD) in accordance with standard EN 15804.
• Available for download at International EPD System.
• Item number-specific life cycle assessment data in the technical data sheets.
• Product is registered in the DGNB Navigator (building product platform).

Serves as proof for certification systems, e.g:

• DGNB (German Sustainable Building Council);
• BREEAM (Building Research Establishment Environmental Assessment Method);
• LEED (Leadership in Energy and Environmental Design).