The KaDius is available in two cladding variants and powder-coated in the color of your choice:

• Fully clad with cladding rings as side cladding and design panel visible from below
• Partially clad with visible, surface-structured EPP design structure on the sides and the design panel on the underside

The valve equipment differs as follows:

Without valve equipment:

The units are supplied without pre-assembled valves. A wide range of accessories is available for individual configuration.

With valve equipment:

Assembly is carried out at the factory. Valves and any existing pipework are checked for tightness and sealed after installation. This reduces the installation time on site.

We offer various solutions for the control and regulation of our units, which can be used depending on the application and requirements:

Electromechanical control

This variant is ideal for simple applications. All integrated actuators are factory-wired to terminals and can be connected to our electromechanical accessories such as thermostats or external controllers.

KaControl MC1

Our comprehensive comfort control offers extended control options for individual rooms or appliance groups. It can be operated either via a touch display or a web interface. Thanks to on-site 0-10 V control or common communication protocols such as Modbus RTU & TCP, BACnet and KNX, this solution is ideal for all BMS applications.

Mounting the units:

• freely suspended
• Close to the ceiling (min. 100 mm distance to the ceiling)
• Not suitable for installation in a suspended ceiling

Avoid the following:

• Impairment of free air circulation due to e.g. lamps, furniture or shelves
• Obstruction of air intake and air distribution
• Electronic units below the unit
• Inaccessibility for maintenance work

• Maximum installation height 4 m
• Maximum installation height 2.5 m
• Minimum ceiling clearance: 100 mm
• Min. wall clearance 1.5 m
• Minimum distance between devices 3.5 m

Exemplary example: KaDius at 7/12/27°C 48% RH ceiling mounting:

• 2 V - 1.3 m
• 4 V - 1.8 m
• 6 V - 2.3 m
• 8 V - 2.8 m
• 10 V - 3.3 m

When operating the unit below the dew point, note the following:

• The maximum delivery height of the condensate pump is 6 m from the lower edge of the unit and must not be exceeded.
• Condensate lines must be ventilated or vented.
• Provide lines with a permanent and continuous gradient (1%). Avoid inclines or so-called "water pockets". Use only fixed lines (no flexible hoses) for horizontal lines.
• Connections and transitions (e.g. from hose to fixed line) must be tightly and mechanically secured, e.g. by the use of hose clamps.
• If a siphon stop device is located at the transition point from the device to the on-site drain, it must be mounted at the highest point of the drainage profile.
• Protect condensate-carrying lines against falling below the dew point, e.g. by means of vapour diffusion-tight insulation.

• Integration of the KaDius into existing building equipment elements is possible.
• Attaching customer-supplied equipment to the KaDius is not permitted.
• Air passages must not be blocked by building fixtures.
• Accessibility of the KaDius for maintenance must continue to be guaranteed.

• Complies with the relevant hygiene guideline VDI 6022
• Goal: Ensuring hygienic supply air that is harmless to health
• Applies to common rooms such as workplaces, meeting rooms, break rooms, living rooms, sports facilities and sales rooms.
• With factory-fitted ISO Coarse filter in the intake area.
• Accessibility of all ventilated and water-bearing components for cleaning.

• Considers the environmental impact of the product over its entire life cycle.
• Published as an Environmental Product Declaration (EPD) in accordance with standard EN 15804.
• Available for download at International EPD System.
• Item number-specific life cycle assessment data in the technical data sheets.
• Product is registered in the DGNB Navigator (building product platform).

Serves as proof for certification systems, e.g:

• DGNB (German Sustainable Building Council);
• BREEAM (Building Research Establishment Environmental Assessment Method);
• LEED (Leadership in Energy and Environmental Design).