Unit Heaters
Ultra
Ceiling unit for heating, cooling, ventilation in large, high-end interiors.
Overview
The product range gives you complete design freedom: with a height of only 330 mm, three different sizes, extensive accessories and much more.
You need the Ultra for large spaces with large surface areas. With its 4-layered heat exchanger, the Ultra has just the right character for heating with low water temperatures. Create a future-proof system with optimum energy efficiency through the use of a KaClima heat pump.
Our products are suitable for use with refrigerants. Use the natural refrigerant CO2 with low greenhouse gas potential.
Ultra unit heaters represent high-performance and also energy-saving units from Kampmann: they operate at the precise output needed – thanks to new continuously variable control. Not a watt less, but not a watt more either. For end users this means that Ultra units do not emit a single decibel more than is needed.
We are committed to the mantra of “Getting rid of dead wood” with our unit heaters and are systematically moving over to EC technology. The entire Ultra range is ErP-compliant – now and in future. Our EC motors operate extremely energy-efficiently and also very quietly, thanks to their whisper-quiet sickle-blade fans.
Significant costs are saved in the long term by the use of energy-efficient EC fans and the maintenance-friendly cooling models with external pump sump.
Count on high heating and cooling outputs in every direction with the perfectly proportioned circular heat exchanger. Decide by adjusting the wide fins in which direction the prepared air is to be directed for a total comfort climate.
Heat Pump Ready
This product is suitable for use with a heat pump or other low temperature system. Reduce your energy requirements, operating costs and emissions with our Heat Pump ready range of products. And make you and your customers less dependent on fossil fuels.
We have appropriate heat pump solutions for many applications, from industrial sheds, office buildings, hotels to private homes.
→ Discover more
- Continuously variable EC single-phase whisper-quiet sickle-blade fan (see Fig.)
- High-efficiency due to the aerodynamic design of the rotor housing
- Motor protection class IP 54
- According to DIN ISO 21940-11 for the corresponding fan category; the external rotor motor integrated in the fan impeller is balanced according to ISO 14694
- External rotor motor integrated in the fan impeller
- Complies with Directive (EU) 327/2011 ("LOT 11")
- Heating: low-temperature version for operation with very low water temperatures
- Cooling: highest possible cooling output even with dry cooling by means of round large-surface heat exchanger
Ultra-efficient as a component in a hybrid system: while the Ultra has decentralised temperature control, an air handling unit with small dimensions deals with ventilation and heat recovery. This saves operating costs as all components only work when demand is detected. And you benefit from the reduced size of the air handling unit in terms of investment and installation.
- Ease of access by snap-lock quick-release closure and positioning aid
- External pump sump for visual control through the outlet grille
- Float switch easily accessible – without the need to dismantle the base and condensation tray
- Energy-saving condensate pump even more powerful and quieter with a delivery height of up to 8 m
- Controlled flow of residual water during maintenance – outlet connector in the pump sump
Housing with base cover easily removable for maintenance
The air flows out through six air discharge openings and is guided through air guidance fins. A grid defines their adjustment into six positions.
Downloads
Declarations/Certificates
Certificate ISO 50001:2018
PDF
(194 kB)
Certificate ISO 9001:2008
PDF
(118 kB)
EU Declaration of Conformity for unit heaters
PDF
(369 kB)
ErP data sheet 2016-2281 for Ultra unit heater
PDF
(97 kB)
ErP data sheet 1253-2014 for Ultra unit heater
PDF
(233 kB)
CAD-Drawings
Ultra unit heaters, heating [mm]
PDF
(354 kB)
Ultra unit heaters, heating or cooling [mm]
PDF
(318 kB)
Ultra unit heaters, heating [Inch]
PDF
(329 kB)
Ultra unit heaters, heating or cooling [Inch]
PDF
(292 kB)
Ultra unit heaters, heating [Inch]
DXF
(10.8 MB)
Ultra unit heaters, heating or cooling [Inch]
DWG
(1.4 MB)
Ultra unit heaters, heating [Inch]
DWG
(1.4 MB)
Ultra unit heaters, heating or cooling [mm]
DWG
(1.9 MB)
Ultra unit heaters, heating [mm]
DWG
(2 MB)
Ultra unit heaters, heating or cooling [Inch]
DXF
(10.3 MB)
Ultra unit heaters, heating [mm]
DXF
(14.8 MB)
Ultra unit heaters, heating or cooling [mm]
DXF
(14.3 MB)
Technical catalogues
Ultra unit heaters
PDF
(11.4 MB)
Cross-product information
ErP: Consequences forventilation systems
PDF
(243 kB)
Brochure Unit Heaters
PDF
(2.3 MB)
BIM data (Building Information Modeling)
Kampmann Group BIM data
Manuals
Ultra unit heaters
PDF
(4.8 MB)
Ultra unit heaters, brief instructions
PDF
(2.1 MB)
