Diffusers
IQA
Displacement diffuser for the industrial sector. The air load is distributed evenly through the sleeve surface over the entire height.
The IQA is a round galvanised steel or stainless steel displacement air outlet, which has been developed for use in industrial environments and in multi-purpose halls. The air discharge direction can be adjusted continuously from horizontal to vertical using a two-section damper element. Thus, optimal and comfortable air flows in the room are always achieved for different room situations at low sound power levels depending on the heating and cooling outputs to be provided.
The IQA consists of a cylinder with elongated slots with a multi-layer distribution element for laminar air supply, which enables optimal adjustment of the air stream for heating and also for cooling. The diffuser is connected to the supply air duct by a plug-in connector.
IQA diffusers come in different versions, defined by the way in which the air damper (throttle damper) is adjusted:
- Manual adjustment, central
- Electrical actuator, internal
- Thermal adjustment unit
Downloads
Declarations/Certificates
Certificate ISO 50001:2018
PDF
(194 kB)
Certificate ISO 9001:2008
PDF
(118 kB)
BIM data (Building Information Modeling)
Revit data set for industrial diffuser IQA
RFA
(6 MB)