Three building blocks for the best hall climate concept
Powerful Ultra Allround design-led air conditioning unit
Are you designing the energy-efficient renovation of an existing hall or the building services for a new building? We can assist with this, delivering a solution perfectly tailored to your needs. In doing so, we will provide you with three building blocks in terms of design, consulting and the latest products. You decide when and to what extent you need our support.
1st building block:
Accurate design – with our hall heating tool
Test our new tool and design your own hall. Determine the heat load of your hall as well as the annual heat requirement in just a few minutes. The software asks for the key figures in a few simple steps. Do you know the exact dimensions or the occupancy times of the hall? Then you can start.
Parameters, including your required occupancy temperature or information on the insulation of the outer shell, are also called for to be able to supply you with the correct calculation results.
We then supplement these parameters with relevant variables, including the annual temperature profile at the location of your hall - precise to the exact post code and complete with the relevant weather data.
2nd building block:
Reliable advice – with our customized product design
Have you already made all calculations using the hall heating tool? You decide whether the calculation results are adequate or whether we need to work out and offer the best system solution, including suggested products, tailored individually to your requirements. In the process, we calculate whether a heat pump will pay off for you and how many unit heaters need to be installed in the hall to generate a comfortable indoor climate. And, of course, we also take the hall doorways into consideration. Air curtains installed there ensure that cold air is prevented from entering in winter and that warm hall air does not escape, even when the doors are temporarily open. This saves energy, as well as money.
The benefits of our tailored advice:
Made-to-measure solutions:
We determine the most suitable hall heating system and the optimum units. With coordinated control, on request.
Improved efficiency:
We ensure that our system solution works efficiently and perfectly meets the heat requirements of your hall. This results in improved energy efficiency and saves costs.
Expert knowledge:
We are the building services experts. Take advantage of our expertise and our decade-long experience in finding the best solution for your hall that will pay off in the long term.
The latest and new technology:
We use state-of-the-art and energy-efficient solutions. Unlike gas-fired systems, you save money in the long term with the combination of unit heaters and heat pumps, at the same time reducing CO2emissions. This is how sustainability works.
3rd building block:
Efficient air conditioning technology – with our
new Ultra Allround
For many operators, the design of the unit is increasingly important for a perfect hall climate concept. That is why we have developed the Ultra Allround. Ultra Allround units are particularly suitable for open and high ceilings, whether in retail stores, industrial or commercial halls. This unit makes low-temperature heating and cooling possible with ease.
→ Find out more now
Main benefits of the Ultra Allround at a glance
7 m mounting height: With an penetration depth of 7 m, the Ultra Allround is also suitable for high spaces.
Heating and cooling mode: The air flow is adjusted by the motor: Heating = vertical air outlet, cooling = horizontal air outlet.
Low temperature stratification:The Ultra Allround ensures that warm air enters the occupied zone at a high pulsation rate. Hardly any thermal energy is lost due to temperature stratification under the ceiling and thus saves energy costs.
Comfort: A pleasant, draft-free climate is not a problem for the Ultra Allround thanks to its intelligent air routing.
Design-led unit: High heat and warm outputs combined in a new unit design. All units are painted in a color of the customers’ choice.
Heat Pump ready: Our label promises the seamless operation of the Ultra Allround in conjunction with a heat pump.
Use the Ultra Allround to create a stylish eye-catching system in design-orientated new buildings or renovation projects. It is ideally suited for heating independently of the gas in conjunction with a heat pump.
Put it on your agenda and let us talk about it.
For more information, find your personal contact.